Showing:

Annotations
Attributes
Diagrams
Facets
Properties
Source
Used by
Element metobj:SimpleCubicSplineCurveType/metobj:vectorAtStart
Namespace http://xml.fmi.fi/namespace/meteorology/conceptual-model/meteorological-objects/2009/04/28
Annotations
 
"vectorAtStart" is the unit tangent vector at the start point of the spline.
Diagram
Diagram docindex142.tmp#id61 docindex55.tmp#id62 docindex143.tmp#id280
Type gml:VectorType
Type hierarchy
Properties
content: complex
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional 
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis 
				labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. 
				When the srsName attribute is omitted, this attribute shall also be omitted.
srsDimension positiveInteger optional 
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is 
				specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional 
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType 
				(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the 
				location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this 
				geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified 
				at the direct position level only in rare cases.
uomLabels gml:NCNameList optional 
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the 
				gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the 
				axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute 
				shall also be omitted.
Source
 
<xs:element name="vectorAtStart" type="gml:VectorType">
  <xs:annotation>
    <xs:documentation>"vectorAtStart" is the unit tangent vector at the start point of the spline.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/04/28/metobjects-common.xsd
Element metobj:SimpleCubicSplineCurveType/metobj:vectorAtEnd
Namespace http://xml.fmi.fi/namespace/meteorology/conceptual-model/meteorological-objects/2009/04/28
Annotations
 
"vectorAtEnd" is the unit tangent vector at the end point of the spline.
Diagram
Diagram docindex142.tmp#id61 docindex55.tmp#id62 docindex143.tmp#id280
Type gml:VectorType
Type hierarchy
Properties
content: complex
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional 
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis 
				labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. 
				When the srsName attribute is omitted, this attribute shall also be omitted.
srsDimension positiveInteger optional 
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is 
				specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional 
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType 
				(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the 
				location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this 
				geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified 
				at the direct position level only in rare cases.
uomLabels gml:NCNameList optional 
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the 
				gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the 
				axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute 
				shall also be omitted.
Source
 
<xs:element name="vectorAtEnd" type="gml:VectorType">
  <xs:annotation>
    <xs:documentation>"vectorAtEnd" is the unit tangent vector at the end point of the spline.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/04/28/metobjects-common.xsd
Complex Type metobj:SimpleCubicSplineCurveType
Namespace http://xml.fmi.fi/namespace/meteorology/conceptual-model/meteorological-objects/2009/04/28
Annotations
 
A Simplified version of gml:CurveType with a single CubicSpline segment: The whole curve is
                described as only one CubicSpline. The contents are taken directly from gml:CubicSplineType.
                
                Deprecated in MetObjets 2009/04/28, use metobj:CubicSplineCurveType instead.
Diagram
Diagram docindex5.tmp#id53 docindex6.tmp#id34 docindex7.tmp#id48 docindex8.tmp#id50 docindex9.tmp#id33 docindex10.tmp#id32 docindex54.tmp#id119 docindex55.tmp#id62 docindex54.tmp#id118 docindex130.tmp#id252 docindex280.tmp#id329 docindex401.tmp#id854 docindex401.tmp#id855 docindex30.tmp#id429 docindex401.tmp#id852 docindex401.tmp#id853
Type extension of gml:AbstractCurveType
Type hierarchy
Used by
Model gml:metaDataProperty* , gml:description{0,1} , gml:name* , gml:posList , metobj:vectorAtStart , metobj:vectorAtEnd
Children gml:description, gml:metaDataProperty, gml:name, gml:posList, metobj:vectorAtEnd, metobj:vectorAtStart
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional 
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis 
				labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. 
				When the srsName attribute is omitted, this attribute shall also be omitted.
degree xs:integer 3 optional 
The degree for a cubic spline is "3".
gid string optional 
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. 
						This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used 
						anymore and may be deleted in future versions of GML without further notice.
gml:id ID optional 
Database handle for the object.  It is of XML type ID, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
interpolation gml:CurveInterpolationType cubicSpline optional 
The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".
srsDimension positiveInteger optional 
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is 
				specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional 
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType 
				(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the 
				location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this 
				geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified 
				at the direct position level only in rare cases.
uomLabels gml:NCNameList optional 
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the 
				gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the 
				axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute 
				shall also be omitted.
Source
 
<xs:complexType name="SimpleCubicSplineCurveType">
  <xs:annotation>
    <xs:documentation>A Simplified version of gml:CurveType with a single CubicSpline segment: The whole curve is described as only one CubicSpline. The contents are taken directly from gml:CubicSplineType. Deprecated in MetObjets 2009/04/28, use metobj:CubicSplineCurveType instead.</xs:documentation>
  </xs:annotation>
  <xs:complexContent>
    <xs:extension base="gml:AbstractCurveType">
      <xs:sequence>
        <xs:element ref="gml:posList"/>
        <xs:element name="vectorAtStart" type="gml:VectorType">
          <xs:annotation>
            <xs:documentation>"vectorAtStart" is the unit tangent vector at the start point of the spline.</xs:documentation>
          </xs:annotation>
        </xs:element>
        <xs:element name="vectorAtEnd" type="gml:VectorType">
          <xs:annotation>
            <xs:documentation>"vectorAtEnd" is the unit tangent vector at the end point of the spline.</xs:documentation>
          </xs:annotation>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="interpolation" type="gml:CurveInterpolationType" fixed="cubicSpline">
        <xs:annotation>
          <xs:documentation>The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".</xs:documentation>
        </xs:annotation>
      </xs:attribute>
      <xs:attribute name="degree" type="xs:integer" fixed="3">
        <xs:annotation>
          <xs:documentation>The degree for a cubic spline is "3".</xs:documentation>
        </xs:annotation>
      </xs:attribute>
    </xs:extension>
  </xs:complexContent>
</xs:complexType>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/04/28/metobjects-common.xsd
Attribute metobj:SimpleCubicSplineCurveType/@interpolation
Namespace No namespace
Annotations
 
The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".
Type gml:CurveInterpolationType
Properties
fixed: cubicSpline
Facets
enumeration linear, geodesic, circularArc3Points, circularArc2PointWithBulge, circularArcCenterPointWithRadius, elliptical, clothoid, conic, polynomialSpline, cubicSpline, rationalSpline
Used by
Source
 
<xs:attribute name="interpolation" type="gml:CurveInterpolationType" fixed="cubicSpline">
  <xs:annotation>
    <xs:documentation>The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".</xs:documentation>
  </xs:annotation>
</xs:attribute>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/04/28/metobjects-common.xsd
Attribute metobj:SimpleCubicSplineCurveType/@degree
Namespace No namespace
Annotations
 
The degree for a cubic spline is "3".
Type xs:integer
Properties
fixed: 3
Used by
Source
 
<xs:attribute name="degree" type="xs:integer" fixed="3">
  <xs:annotation>
    <xs:documentation>The degree for a cubic spline is "3".</xs:documentation>
  </xs:annotation>
</xs:attribute>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/04/28/metobjects-common.xsd
XML Schema documentation generated by ® XML Editor.