Showing:

Annotations
Attributes
Diagrams
Instances
Properties
Source
Used by
Element gml:SolidType / gml:exterior
Namespace http://www.opengis.net/gml
Annotations
Boundaries of solids are similar to surface boundaries. In normal 3-dimensional Euclidean space, one (composite) surface is distinguished as the exterior. In the more general case, this is not always possible.
Diagram
Diagram docindex1.tmp#id36 docindex216.tmp#id168 docindex259.tmp#id358
Type gml:SurfacePropertyType
Properties
content: complex
minOccurs: 0
Model gml:_Surface
Children gml:_Surface
Instance
<gml:exterior xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">
  <gml:_Surface axisLabels="" gid="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:_Surface>
</gml:exterior>
Attributes
QName Type Fixed Default Use Annotation
gml:remoteSchema anyURI optional
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
xlink:actuate restriction of string optional
The 'actuate' attribute is used to communicate the desired timing 
of traversal from the starting resource to the ending resource; 
it's value should be treated as follows:
onLoad - traverse to the ending resource immediately on loading 
         the starting resource 
onRequest - traverse from the starting resource to the ending 
            resource only on a post-loading event triggered for 
            this purpose 
other - behavior is unconstrained; examine other markup in link 
        for hints 
none - behavior is unconstrained
xlink:arcrole anyURI optional
xlink:href anyURI optional
xlink:role anyURI optional
xlink:show restriction of string optional
The 'show' attribute is used to communicate the desired presentation 
of the ending resource on traversal from the starting resource; it's 
value should be treated as follows: 
new - load ending resource in a new window, frame, pane, or other 
      presentation context
replace - load the resource in the same window, frame, pane, or 
          other presentation context
embed - load ending resource in place of the presentation of the 
        starting resource
other - behavior is unconstrained; examine other markup in the 
        link for hints 
none - behavior is unconstrained
xlink:title string optional
xlink:type string simple optional
Source
<element name="exterior" type="gml:SurfacePropertyType" minOccurs="0">
  <annotation>
    <appinfo>
      <sch:pattern name="Check either href or content not both">
        <sch:rule context="gml:exterior">
          <sch:extends rule="hrefOrContent"/>
        </sch:rule>
      </sch:pattern>
    </appinfo>
    <documentation>Boundaries of solids are similar to surface boundaries. In normal 3-dimensional Euclidean space, one (composite) surface is distinguished as the exterior. In the more general case, this is not always possible.</documentation>
  </annotation>
</element>
Schema location http://schemas.opengis.net/gml/3.1.1/base/geometryPrimitives.xsd
Element gml:SolidType / gml:interior
Namespace http://www.opengis.net/gml
Annotations
Boundaries of solids are similar to surface boundaries.
Diagram
Diagram docindex1.tmp#id36 docindex216.tmp#id168 docindex259.tmp#id358
Type gml:SurfacePropertyType
Properties
content: complex
minOccurs: 0
maxOccurs: unbounded
Model gml:_Surface
Children gml:_Surface
Instance
<gml:interior xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">
  <gml:_Surface axisLabels="" gid="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:_Surface>
</gml:interior>
Attributes
QName Type Fixed Default Use Annotation
gml:remoteSchema anyURI optional
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
xlink:actuate restriction of string optional
The 'actuate' attribute is used to communicate the desired timing 
of traversal from the starting resource to the ending resource; 
it's value should be treated as follows:
onLoad - traverse to the ending resource immediately on loading 
         the starting resource 
onRequest - traverse from the starting resource to the ending 
            resource only on a post-loading event triggered for 
            this purpose 
other - behavior is unconstrained; examine other markup in link 
        for hints 
none - behavior is unconstrained
xlink:arcrole anyURI optional
xlink:href anyURI optional
xlink:role anyURI optional
xlink:show restriction of string optional
The 'show' attribute is used to communicate the desired presentation 
of the ending resource on traversal from the starting resource; it's 
value should be treated as follows: 
new - load ending resource in a new window, frame, pane, or other 
      presentation context
replace - load the resource in the same window, frame, pane, or 
          other presentation context
embed - load ending resource in place of the presentation of the 
        starting resource
other - behavior is unconstrained; examine other markup in the 
        link for hints 
none - behavior is unconstrained
xlink:title string optional
xlink:type string simple optional
Source
<element name="interior" type="gml:SurfacePropertyType" minOccurs="0" maxOccurs="unbounded">
  <annotation>
    <appinfo>
      <sch:pattern name="Check either href or content not both">
        <sch:rule context="gml:interior">
          <sch:extends rule="hrefOrContent"/>
        </sch:rule>
      </sch:pattern>
    </appinfo>
    <documentation>Boundaries of solids are similar to surface boundaries.</documentation>
  </annotation>
</element>
Schema location http://schemas.opengis.net/gml/3.1.1/base/geometryPrimitives.xsd
Complex Type gml:SolidType
Namespace http://www.opengis.net/gml
Annotations
A solid is the basis for 3-dimensional geometry. The extent of a solid is defined by the boundary surfaces (shells). A shell is represented by a composite surface, where every  shell is used to represent a single connected component of the boundary of a solid. It consists of a composite surface (a list of orientable surfaces) connected in a topological cycle (an object whose boundary is empty). Unlike a Ring, a Shell's elements have no natural sort order. Like Rings, Shells are simple.
Diagram
Diagram docindex4.tmp#id52 docindex5.tmp#id34 docindex6.tmp#id47 docindex7.tmp#id49 docindex8.tmp#id33 docindex9.tmp#id32 docindex56.tmp#id109 docindex57.tmp#id61 docindex56.tmp#id108 docindex58.tmp#id171 docindex344.tmp#id683 docindex345.tmp#id689 docindex345.tmp#id690
Type extension of gml:AbstractSolidType
Type hierarchy
Used by
Element gml:Solid
Model gml:metaDataProperty* , gml:description{0,1} , gml:name* , gml:exterior{0,1} , gml:interior*
Children gml:description, gml:exterior, gml:interior, gml:metaDataProperty, gml:name
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis 
labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. 
When the srsName attribute is omitted, this attribute shall also be omitted.
gid string optional
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. 
This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used 
anymore and may be deleted in future versions of GML without further notice.
gml:id ID optional
Database handle for the object.  It is of XML type ID, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
srsDimension positiveInteger optional
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is 
specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType 
(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the 
location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this 
geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified 
at the direct position level only in rare cases.
uomLabels gml:NCNameList optional
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the 
gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the 
axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute 
shall also be omitted.
Source
<complexType name="SolidType">
  <annotation>
    <documentation>A solid is the basis for 3-dimensional geometry. The extent of a solid is defined by the boundary surfaces (shells). A shell is represented by a composite surface, where every shell is used to represent a single connected component of the boundary of a solid. It consists of a composite surface (a list of orientable surfaces) connected in a topological cycle (an object whose boundary is empty). Unlike a Ring, a Shell's elements have no natural sort order. Like Rings, Shells are simple.</documentation>
  </annotation>
  <complexContent>
    <extension base="gml:AbstractSolidType">
      <sequence>
        <element name="exterior" type="gml:SurfacePropertyType" minOccurs="0">
          <annotation>
            <appinfo>
              <sch:pattern name="Check either href or content not both">
                <sch:rule context="gml:exterior">
                  <sch:extends rule="hrefOrContent"/>
                </sch:rule>
              </sch:pattern>
            </appinfo>
            <documentation>Boundaries of solids are similar to surface boundaries. In normal 3-dimensional Euclidean space, one (composite) surface is distinguished as the exterior. In the more general case, this is not always possible.</documentation>
          </annotation>
        </element>
        <element name="interior" type="gml:SurfacePropertyType" minOccurs="0" maxOccurs="unbounded">
          <annotation>
            <appinfo>
              <sch:pattern name="Check either href or content not both">
                <sch:rule context="gml:interior">
                  <sch:extends rule="hrefOrContent"/>
                </sch:rule>
              </sch:pattern>
            </appinfo>
            <documentation>Boundaries of solids are similar to surface boundaries.</documentation>
          </annotation>
        </element>
      </sequence>
    </extension>
  </complexContent>
</complexType>
Schema location http://schemas.opengis.net/gml/3.1.1/base/geometryPrimitives.xsd