Showing:

Annotations
Attributes
Diagrams
Facets
Properties
Source
Used by
Element metobj:CubicSplineRingType / metobj:vectorAtStart
Namespace http://xml.fmi.fi/namespace/meteorology/conceptual-model/meteorological-objects/2009/11/09
Annotations
 
"vectorAtStart" is the unit tangent vector at the start point of the spline.
Diagram
Diagram docindex80.tmp#id60 docindex57.tmp#id61 docindex165.tmp#id185
Type gml:VectorType
Type hierarchy
Properties
content: complex
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional 
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis 
labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. 
When the srsName attribute is omitted, this attribute shall also be omitted.
srsDimension positiveInteger optional 
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is 
specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional 
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType 
(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the 
location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this 
geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified 
at the direct position level only in rare cases.
uomLabels gml:NCNameList optional 
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the 
gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the 
axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute 
shall also be omitted.
Source
 
<element name="vectorAtStart" type="gml:VectorType">
  <annotation>
    <documentation>"vectorAtStart" is the unit tangent vector at the start point of the spline.</documentation>
  </annotation>
</element>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/11/09/metobjects-common-geometry.xsd
Element metobj:CubicSplineRingType / metobj:vectorAtEnd
Namespace http://xml.fmi.fi/namespace/meteorology/conceptual-model/meteorological-objects/2009/11/09
Annotations
 
"vectorAtEnd" is the unit tangent vector at the end point of the spline.
Diagram
Diagram docindex80.tmp#id60 docindex57.tmp#id61 docindex165.tmp#id185
Type gml:VectorType
Type hierarchy
Properties
content: complex
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional 
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis 
labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. 
When the srsName attribute is omitted, this attribute shall also be omitted.
srsDimension positiveInteger optional 
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is 
specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional 
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType 
(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the 
location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this 
geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified 
at the direct position level only in rare cases.
uomLabels gml:NCNameList optional 
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the 
gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the 
axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute 
shall also be omitted.
Source
 
<element name="vectorAtEnd" type="gml:VectorType">
  <annotation>
    <documentation>"vectorAtEnd" is the unit tangent vector at the end point of the spline.</documentation>
  </annotation>
</element>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/11/09/metobjects-common-geometry.xsd
Complex Type metobj:CubicSplineRingType
Namespace http://xml.fmi.fi/namespace/meteorology/conceptual-model/meteorological-objects/2009/11/09
Annotations
 
the first and last coordinates must be coincident.
Diagram
Diagram docindex4.tmp#id52 docindex5.tmp#id34 docindex6.tmp#id47 docindex7.tmp#id49 docindex8.tmp#id33 docindex9.tmp#id32 docindex56.tmp#id109 docindex57.tmp#id61 docindex56.tmp#id108 docindex320.tmp#id176 docindex469.tmp#id187 docindex469.tmp#id189 docindex131.tmp#id74 docindex132.tmp#id177 docindex134.tmp#id181 docindex469.tmp#id184 docindex469.tmp#id186
Type extension of gml:AbstractRingType
Type hierarchy
Used by
Model gml:metaDataProperty* , gml:description{0,1} , gml:name* , (gml:pos | gml:pointProperty | gml:posList) , metobj:vectorAtStart , metobj:vectorAtEnd
Children gml:description, gml:metaDataProperty, gml:name, gml:pointProperty, gml:pos, gml:posList, metobj:vectorAtEnd, metobj:vectorAtStart
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional 
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis 
labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. 
When the srsName attribute is omitted, this attribute shall also be omitted.
degree integer 3 optional 
The degree for a cubic spline is "3".
gid string optional 
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. 
This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used 
anymore and may be deleted in future versions of GML without further notice.
gml:id ID optional 
Database handle for the object.  It is of XML type ID, so is constrained to be unique in the XML document within which it occurs.  An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods.  This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
interpolation gml:CurveInterpolationType cubicSpline optional 
The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism
uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".
srsDimension positiveInteger optional 
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is 
specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional 
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType 
(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the 
location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this 
geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified 
at the direct position level only in rare cases.
uomLabels gml:NCNameList optional 
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the 
gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the 
axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute 
shall also be omitted.
Source
 
<complexType name="CubicSplineRingType">
  <annotation>
    <documentation>the first and last coordinates must be coincident.</documentation>
  </annotation>
  <complexContent>
    <extension base="gml:AbstractRingType">
      <sequence>
        <choice>
          <annotation>
            <documentation>GML supports two different ways to specify the control points of a curve segment. 1. A sequence of "pos" (DirectPositionType) or "pointProperty" (PointPropertyType) elements. "pos" elements are control points that are only part of this curve segment, "pointProperty" elements contain a point that may be referenced from other geometry elements or reference another point defined outside of this curve segment (reuse of existing points). 2. The "posList" element allows for a compact way to specifiy the coordinates of the control points, if all control points are in the same coordinate reference systems and belong to this curve segment only. The number of direct positions in the list must be at least three.</documentation>
          </annotation>
          <choice minOccurs="4" maxOccurs="unbounded">
            <element ref="gml:pos"/>
            <element ref="gml:pointProperty"/>
          </choice>
          <element ref="gml:posList"/>
        </choice>
        <element name="vectorAtStart" type="gml:VectorType">
          <annotation>
            <documentation>"vectorAtStart" is the unit tangent vector at the start point of the spline.</documentation>
          </annotation>
        </element>
        <element name="vectorAtEnd" type="gml:VectorType">
          <annotation>
            <documentation>"vectorAtEnd" is the unit tangent vector at the end point of the spline.</documentation>
          </annotation>
        </element>
      </sequence>
      <attribute name="interpolation" type="gml:CurveInterpolationType" fixed="cubicSpline">
        <annotation>
          <documentation>The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".</documentation>
        </annotation>
      </attribute>
      <attribute name="degree" type="integer" fixed="3">
        <annotation>
          <documentation>The degree for a cubic spline is "3".</documentation>
        </annotation>
      </attribute>
    </extension>
  </complexContent>
</complexType>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/11/09/metobjects-common-geometry.xsd
Attribute metobj:CubicSplineRingType / @interpolation
Namespace No namespace
Annotations
 
The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism
uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".
Type gml:CurveInterpolationType
Properties
fixed: cubicSpline
Facets
enumeration linear
enumeration geodesic
enumeration circularArc3Points
enumeration circularArc2PointWithBulge
enumeration circularArcCenterPointWithRadius
enumeration elliptical
enumeration clothoid
enumeration conic
enumeration polynomialSpline
enumeration cubicSpline
enumeration rationalSpline
Used by
Source
 
<attribute name="interpolation" type="gml:CurveInterpolationType" fixed="cubicSpline">
  <annotation>
    <documentation>The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".</documentation>
  </annotation>
</attribute>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/11/09/metobjects-common-geometry.xsd
Attribute metobj:CubicSplineRingType / @degree
Namespace No namespace
Annotations
 
The degree for a cubic spline is "3".
Type integer
Properties
fixed: 3
Used by
Source
 
<attribute name="degree" type="integer" fixed="3">
  <annotation>
    <documentation>The degree for a cubic spline is "3".</documentation>
  </annotation>
</attribute>
Schema location http://xml.fmi.fi/schema/meteorology/conceptual-model/meteorological-objects/2009/11/09/metobjects-common-geometry.xsd
XML Schema documentation generated by ® XML Editor.