Showing:

Annotations
Attributes
Diagrams
Facets
Instances
Properties
Source
Used by
Element womlcore:AbstractLineObjectType / womlcore:controlCurve
Namespace http://xml.fmi.fi/namespace/woml/core/2010/09/13
Annotations
This element specifies the definitive geometry of the center line of the given line object in the given CRS. Applications should use this information in rendering the line object when ever possible. The using applications should note, that rendering the line in other CRS (projection) that the given one probably requires a more complex path matching than simply re-projecting the control points. One possible way would be sampling the curve as lineString with appropriate frequency, translating the sampled lineString, and finally fitting a new cubic spline to the sampled and translated lineString. If only rendering (and not editing) of the line object is needed, the secondary geometry information of the interpolationCurve (if given) element may suffice for drawing the line object, this depends on the value of the samplingFrequency element and the intended visualization resolution. The line string interpolation is straight forward to convert to another CRS, as the conversion can be done point by point.
Diagram
Diagram index26.tmp#id33 index58.tmp#id100 index59.tmp#id434
Type womlcore:CombinedSegmentedCurvePropertyType
Properties
content: complex
minOccurs: 1
maxOccurs: 1
Model womlcore:CombinedSegmentedCurve
Children womlcore:CombinedSegmentedCurve
Instance
<womlcore:controlCurve xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">
  <womlcore:CombinedSegmentedCurve axisLabels="" gid="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</womlcore:CombinedSegmentedCurve>
</womlcore:controlCurve>
Attributes
QName Type Fixed Default Use Annotation
gml:remoteSchema anyURI optional
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
xlink:actuate restriction of string optional
The 'actuate' attribute is used to communicate the desired timing of traversal from the starting resource to the ending resource; it's value should be treated as follows: onLoad - traverse to the ending resource immediately on loading the starting resource onRequest - traverse from the starting resource to the ending resource only on a post-loading event triggered for this purpose other - behavior is unconstrained; examine other markup in link for hints none - behavior is unconstrained
xlink:arcrole anyURI optional
xlink:href anyURI optional
xlink:role anyURI optional
xlink:show restriction of string optional
The 'show' attribute is used to communicate the desired presentation of the ending resource on traversal from the starting resource; it's value should be treated as follows: new - load ending resource in a new window, frame, pane, or other presentation context replace - load the resource in the same window, frame, pane, or other presentation context embed - load ending resource in place of the presentation of the starting resource other - behavior is unconstrained; examine other markup in the link for hints none - behavior is unconstrained
xlink:title string optional
xlink:type string simple optional
Source
<element name="controlCurve" type="womlcore:CombinedSegmentedCurvePropertyType" minOccurs="1" maxOccurs="1">
  <annotation>
    <documentation>This element specifies the definitive geometry of the center line of the given line object in the given CRS. Applications should use this information in rendering the line object when ever possible. The using applications should note, that rendering the line in other CRS (projection) that the given one probably requires a more complex path matching than simply re-projecting the control points. One possible way would be sampling the curve as lineString with appropriate frequency, translating the sampled lineString, and finally fitting a new cubic spline to the sampled and translated lineString. If only rendering (and not editing) of the line object is needed, the secondary geometry information of the interpolationCurve (if given) element may suffice for drawing the line object, this depends on the value of the samplingFrequency element and the intended visualization resolution. The line string interpolation is straight forward to convert to another CRS, as the conversion can be done point by point.</documentation>
  </annotation>
</element>
Schema location http://xml.fmi.fi/schema/woml/core/2010/09/13/woml-core.xsd
Element womlcore:AbstractLineObjectType / womlcore:interpolatedCurve
Namespace http://xml.fmi.fi/namespace/woml/core/2010/09/13
Diagram
Diagram index26.tmp#id33 index259.tmp#id98 index405.tmp#id447
Type womlcore:LineStringInterpolationCurvePropertyType
Properties
content: complex
minOccurs: 0
maxOccurs: 1
Model womlcore:LineStringInterpolationCurve
Children womlcore:LineStringInterpolationCurve
Instance
<womlcore:interpolatedCurve xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">
  <womlcore:LineStringInterpolationCurve axisLabels="" gid="" gml:id="" samplingFrequencyUOM="" samplingFrequencyValue="" srsDimension="" srsName="" uomLabels="">{1,1}</womlcore:LineStringInterpolationCurve>
</womlcore:interpolatedCurve>
Attributes
QName Type Fixed Default Use Annotation
gml:remoteSchema anyURI optional
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
xlink:actuate restriction of string optional
The 'actuate' attribute is used to communicate the desired timing of traversal from the starting resource to the ending resource; it's value should be treated as follows: onLoad - traverse to the ending resource immediately on loading the starting resource onRequest - traverse from the starting resource to the ending resource only on a post-loading event triggered for this purpose other - behavior is unconstrained; examine other markup in link for hints none - behavior is unconstrained
xlink:arcrole anyURI optional
xlink:href anyURI optional
xlink:role anyURI optional
xlink:show restriction of string optional
The 'show' attribute is used to communicate the desired presentation of the ending resource on traversal from the starting resource; it's value should be treated as follows: new - load ending resource in a new window, frame, pane, or other presentation context replace - load the resource in the same window, frame, pane, or other presentation context embed - load ending resource in place of the presentation of the starting resource other - behavior is unconstrained; examine other markup in the link for hints none - behavior is unconstrained
xlink:title string optional
xlink:type string simple optional
Source
<element name="interpolatedCurve" type="womlcore:LineStringInterpolationCurvePropertyType" minOccurs="0" maxOccurs="1"/>
Schema location http://xml.fmi.fi/schema/woml/core/2010/09/13/woml-core.xsd
Element womlcore:AbstractLineObjectType / womlcore:startPointConnectsTo
Namespace http://xml.fmi.fi/namespace/woml/core/2010/09/13
Diagram
Diagram index26.tmp#id33 index53.tmp#id455
Type womlcore:ConnectionPointReferenceType
Properties
content: complex
minOccurs: 0
maxOccurs: 1
Attributes
QName Type Fixed Default Use Annotation
gml:remoteSchema anyURI optional
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
xlink:actuate restriction of string optional
The 'actuate' attribute is used to communicate the desired timing of traversal from the starting resource to the ending resource; it's value should be treated as follows: onLoad - traverse to the ending resource immediately on loading the starting resource onRequest - traverse from the starting resource to the ending resource only on a post-loading event triggered for this purpose other - behavior is unconstrained; examine other markup in link for hints none - behavior is unconstrained
xlink:arcrole anyURI optional
xlink:href anyURI optional
xlink:role anyURI optional
xlink:show restriction of string optional
The 'show' attribute is used to communicate the desired presentation of the ending resource on traversal from the starting resource; it's value should be treated as follows: new - load ending resource in a new window, frame, pane, or other presentation context replace - load the resource in the same window, frame, pane, or other presentation context embed - load ending resource in place of the presentation of the starting resource other - behavior is unconstrained; examine other markup in the link for hints none - behavior is unconstrained
xlink:title string optional
xlink:type string simple optional
Source
<element name="startPointConnectsTo" type="womlcore:ConnectionPointReferenceType" minOccurs="0" maxOccurs="1"/>
Schema location http://xml.fmi.fi/schema/woml/core/2010/09/13/woml-core.xsd
Element womlcore:AbstractLineObjectType / womlcore:endPointConnectsTo
Namespace http://xml.fmi.fi/namespace/woml/core/2010/09/13
Diagram
Diagram index26.tmp#id33 index53.tmp#id455
Type womlcore:ConnectionPointReferenceType
Properties
content: complex
minOccurs: 0
maxOccurs: 1
Attributes
QName Type Fixed Default Use Annotation
gml:remoteSchema anyURI optional
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
xlink:actuate restriction of string optional
The 'actuate' attribute is used to communicate the desired timing of traversal from the starting resource to the ending resource; it's value should be treated as follows: onLoad - traverse to the ending resource immediately on loading the starting resource onRequest - traverse from the starting resource to the ending resource only on a post-loading event triggered for this purpose other - behavior is unconstrained; examine other markup in link for hints none - behavior is unconstrained
xlink:arcrole anyURI optional
xlink:href anyURI optional
xlink:role anyURI optional
xlink:show restriction of string optional
The 'show' attribute is used to communicate the desired presentation of the ending resource on traversal from the starting resource; it's value should be treated as follows: new - load ending resource in a new window, frame, pane, or other presentation context replace - load the resource in the same window, frame, pane, or other presentation context embed - load ending resource in place of the presentation of the starting resource other - behavior is unconstrained; examine other markup in the link for hints none - behavior is unconstrained
xlink:title string optional
xlink:type string simple optional
Source
<element name="endPointConnectsTo" type="womlcore:ConnectionPointReferenceType" minOccurs="0" maxOccurs="1"/>
Schema location http://xml.fmi.fi/schema/woml/core/2010/09/13/woml-core.xsd
Element womlcore:AbstractLineObjectType / womlcore:elevation
Namespace http://xml.fmi.fi/namespace/woml/core/2010/09/13
Diagram
Diagram index26.tmp#id33 index368.tmp#id459 index369.tmp#id458
Type womlcore:ElevationPropertyType
Properties
content: complex
minOccurs: 0
maxOccurs: 1
Model womlcore:Elevation
Children womlcore:Elevation
Instance
<womlcore:elevation xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">
  <womlcore:Elevation gml:id="">{1,1}</womlcore:Elevation>
</womlcore:elevation>
Attributes
QName Type Fixed Default Use Annotation
gml:remoteSchema anyURI optional
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
xlink:actuate restriction of string optional
The 'actuate' attribute is used to communicate the desired timing of traversal from the starting resource to the ending resource; it's value should be treated as follows: onLoad - traverse to the ending resource immediately on loading the starting resource onRequest - traverse from the starting resource to the ending resource only on a post-loading event triggered for this purpose other - behavior is unconstrained; examine other markup in link for hints none - behavior is unconstrained
xlink:arcrole anyURI optional
xlink:href anyURI optional
xlink:role anyURI optional
xlink:show restriction of string optional
The 'show' attribute is used to communicate the desired presentation of the ending resource on traversal from the starting resource; it's value should be treated as follows: new - load ending resource in a new window, frame, pane, or other presentation context replace - load the resource in the same window, frame, pane, or other presentation context embed - load ending resource in place of the presentation of the starting resource other - behavior is unconstrained; examine other markup in the link for hints none - behavior is unconstrained
xlink:title string optional
xlink:type string simple optional
Source
<element name="elevation" type="womlcore:ElevationPropertyType" minOccurs="0" maxOccurs="1"/>
Schema location http://xml.fmi.fi/schema/woml/core/2010/09/13/woml-core.xsd
Complex Type womlcore:AbstractLineObjectType
Namespace http://xml.fmi.fi/namespace/woml/core/2010/09/13
Annotations
Abstract parent type for WOML Objects defined line segments between an ordered set of geospatial points. The points defined in each of the given line segments should be considered as one consecutive array of geospatial points. If there are more that one segment, the first point (in the orientation order) of each of the segments following the first one is ignored (the first and the last point coordinates must always represent the same point). The orientation of the line is defined by attribute "orientation", starting from the first position in the position list and ending to the last position if positive. This may or may not affect the semantics and the rendering of the line object (depending on whether the concrete types have a natural direction or not). If elevation property is given, its value must be added to possible height value of each of the points in the each line segment. If the CRS of the points is 2-dimensional, the value of the elevation should be interpreted as the static height value of each of the given (control)points.
Diagram
Diagram index0.tmp#id49 index1.tmp#id31 index2.tmp#id44 index3.tmp#id46 index4.tmp#id30 index5.tmp#id29 index6.tmp#id50 index7.tmp#id80 index8.tmp#id28 index15.tmp#id164 index80.tmp#id372 index81.tmp#id381 index82.tmp#id371 index136.tmp#id370 index13.tmp#id127 index13.tmp#id152 index13.tmp#id153 index13.tmp#id154 index13.tmp#id156 index13.tmp#id126 index137.tmp#id382 index137.tmp#id407 index137.tmp#id369 index220.tmp#id469 index220.tmp#id433 index220.tmp#id446 index220.tmp#id454 index220.tmp#id456 index220.tmp#id457
Type extension of womlcore:AbstractMeteorologicalObjectType
Type hierarchy
Properties
abstract: true
Used by
Model gml:metaDataProperty* , gml:description{0,1} , gml:name* , gml:boundedBy{0,1} , gml:location{0,1} , gml:validTime{0,1} , gml:history{0,1} , gml:dataSource{0,1} , womlcore:metaData{0,1} , womlcore:creationTime , womlcore:latestModificationTime{0,1} , womlcore:shortInfo* , womlcore:longInfo* , womlcore:uncertaintyArea{0,1} , womlcore:historyInterpolationRule{0,1} , womlcore:controlCurve , womlcore:interpolatedCurve{0,1} , womlcore:startPointConnectsTo{0,1} , womlcore:endPointConnectsTo{0,1} , womlcore:elevation{0,1}
Children gml:boundedBy, gml:dataSource, gml:description, gml:history, gml:location, gml:metaDataProperty, gml:name, gml:validTime, womlcore:controlCurve, womlcore:creationTime, womlcore:elevation, womlcore:endPointConnectsTo, womlcore:historyInterpolationRule, womlcore:interpolatedCurve, womlcore:latestModificationTime, womlcore:longInfo, womlcore:metaData, womlcore:shortInfo, womlcore:startPointConnectsTo, womlcore:uncertaintyArea
Attributes
QName Type Fixed Default Use Annotation
gml:id ID optional
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
orientation gml:SignType + optional
Source
<complexType name="AbstractLineObjectType" abstract="true">
  <annotation>
    <documentation>Abstract parent type for WOML Objects defined line segments between an ordered set of geospatial points. The points defined in each of the given line segments should be considered as one consecutive array of geospatial points. If there are more that one segment, the first point (in the orientation order) of each of the segments following the first one is ignored (the first and the last point coordinates must always represent the same point). The orientation of the line is defined by attribute "orientation", starting from the first position in the position list and ending to the last position if positive. This may or may not affect the semantics and the rendering of the line object (depending on whether the concrete types have a natural direction or not). If elevation property is given, its value must be added to possible height value of each of the points in the each line segment. If the CRS of the points is 2-dimensional, the value of the elevation should be interpreted as the static height value of each of the given (control)points.</documentation>
  </annotation>
  <complexContent>
    <extension base="womlcore:AbstractMeteorologicalObjectType">
      <sequence>
        <element name="controlCurve" type="womlcore:CombinedSegmentedCurvePropertyType" minOccurs="1" maxOccurs="1">
          <annotation>
            <documentation>This element specifies the definitive geometry of the center line of the given line object in the given CRS. Applications should use this information in rendering the line object when ever possible. The using applications should note, that rendering the line in other CRS (projection) that the given one probably requires a more complex path matching than simply re-projecting the control points. One possible way would be sampling the curve as lineString with appropriate frequency, translating the sampled lineString, and finally fitting a new cubic spline to the sampled and translated lineString. If only rendering (and not editing) of the line object is needed, the secondary geometry information of the interpolationCurve (if given) element may suffice for drawing the line object, this depends on the value of the samplingFrequency element and the intended visualization resolution. The line string interpolation is straight forward to convert to another CRS, as the conversion can be done point by point.</documentation>
          </annotation>
        </element>
        <element name="interpolatedCurve" type="womlcore:LineStringInterpolationCurvePropertyType" minOccurs="0" maxOccurs="1"/>
        <element name="startPointConnectsTo" type="womlcore:ConnectionPointReferenceType" minOccurs="0" maxOccurs="1"/>
        <element name="endPointConnectsTo" type="womlcore:ConnectionPointReferenceType" minOccurs="0" maxOccurs="1"/>
        <element name="elevation" type="womlcore:ElevationPropertyType" minOccurs="0" maxOccurs="1"/>
      </sequence>
      <attribute name="orientation" type="gml:SignType" default="+" use="optional"/>
    </extension>
  </complexContent>
</complexType>
Schema location http://xml.fmi.fi/schema/woml/core/2010/09/13/woml-core.xsd
Attribute womlcore:AbstractLineObjectType / @orientation
Namespace No namespace
Type gml:SignType
Properties
use: optional
default: +
Facets
enumeration -
enumeration +
Used by
Source
<attribute name="orientation" type="gml:SignType" default="+" use="optional"/>
Schema location http://xml.fmi.fi/schema/woml/core/2010/09/13/woml-core.xsd