Showing:

Annotations
Attributes
Diagrams
Facets
Properties
Source
Used by
Element womlcore:CubicSplineRingType / womlcore:vectorAtStart
Namespace http://xml.fmi.fi/namespace/woml/core/2010/05/28
Annotations
"vectorAtStart" is the unit tangent vector at the start point of the spline.
Diagram
Diagram index146.tmp#id56 index130.tmp#id57 index169.tmp#id183
Type gml:VectorType
Type hierarchy
Properties
content: complex
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.
srsDimension positiveInteger optional
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.
uomLabels gml:NCNameList optional
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.
Source
<element name="vectorAtStart" type="gml:VectorType">
  <annotation>
    <documentation>"vectorAtStart" is the unit tangent vector at the start point of the spline.</documentation>
  </annotation>
</element>
Schema location http://xml.fmi.fi/schema/woml/core/2010/05/28/woml-common-geometry.xsd
Element womlcore:CubicSplineRingType / womlcore:vectorAtEnd
Namespace http://xml.fmi.fi/namespace/woml/core/2010/05/28
Annotations
"vectorAtEnd" is the unit tangent vector at the end point of the spline.
Diagram
Diagram index146.tmp#id56 index130.tmp#id57 index169.tmp#id183
Type gml:VectorType
Type hierarchy
Properties
content: complex
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.
srsDimension positiveInteger optional
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.
uomLabels gml:NCNameList optional
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.
Source
<element name="vectorAtEnd" type="gml:VectorType">
  <annotation>
    <documentation>"vectorAtEnd" is the unit tangent vector at the end point of the spline.</documentation>
  </annotation>
</element>
Schema location http://xml.fmi.fi/schema/woml/core/2010/05/28/woml-common-geometry.xsd
Complex Type womlcore:CubicSplineRingType
Namespace http://xml.fmi.fi/namespace/woml/core/2010/05/28
Annotations
the first and last coordinates must be coincident.
Diagram
Diagram index6.tmp#id48 index7.tmp#id30 index8.tmp#id43 index9.tmp#id45 index10.tmp#id29 index11.tmp#id28 index129.tmp#id106 index130.tmp#id57 index129.tmp#id105 index240.tmp#id174 index241.tmp#id185 index241.tmp#id187 index61.tmp#id70 index62.tmp#id175 index64.tmp#id179 index241.tmp#id182 index241.tmp#id184
Type extension of gml:AbstractRingType
Type hierarchy
Used by
Model gml:metaDataProperty* , gml:description{0,1} , gml:name* , (gml:pos | gml:pointProperty | gml:posList) , womlcore:vectorAtStart , womlcore:vectorAtEnd
Children gml:description, gml:metaDataProperty, gml:name, gml:pointProperty, gml:pos, gml:posList, womlcore:vectorAtEnd, womlcore:vectorAtStart
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axis labels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional. When the srsName attribute is omitted, this attribute shall also be omitted.
degree integer 3 optional
The degree for a cubic spline is "3".
gid string optional
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3. This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be used anymore and may be deleted in future versions of GML without further notice.
gml:id ID optional
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
interpolation gml:CurveInterpolationType cubicSpline optional
The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".
srsDimension positiveInteger optional
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension is specified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
srsName anyURI optional
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType (see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at the location the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context this geometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specified at the direct position level only in rare cases.
uomLabels gml:NCNameList optional
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in the gml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When the axisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attribute shall also be omitted.
Source
<complexType name="CubicSplineRingType">
  <annotation>
    <documentation>the first and last coordinates must be coincident.</documentation>
  </annotation>
  <complexContent>
    <extension base="gml:AbstractRingType">
      <sequence>
        <choice>
          <annotation>
            <documentation>GML supports two different ways to specify the control points of a curve segment. 1. A sequence of "pos" (DirectPositionType) or "pointProperty" (PointPropertyType) elements. "pos" elements are control points that are only part of this curve segment, "pointProperty" elements contain a point that may be referenced from other geometry elements or reference another point defined outside of this curve segment (reuse of existing points). 2. The "posList" element allows for a compact way to specifiy the coordinates of the control points, if all control points are in the same coordinate reference systems and belong to this curve segment only. The number of direct positions in the list must be at least three.</documentation>
          </annotation>
          <choice minOccurs="4" maxOccurs="unbounded">
            <element ref="gml:pos"/>
            <element ref="gml:pointProperty"/>
          </choice>
          <element ref="gml:posList"/>
        </choice>
        <element name="vectorAtStart" type="gml:VectorType">
          <annotation>
            <documentation>"vectorAtStart" is the unit tangent vector at the start point of the spline.</documentation>
          </annotation>
        </element>
        <element name="vectorAtEnd" type="gml:VectorType">
          <annotation>
            <documentation>"vectorAtEnd" is the unit tangent vector at the end point of the spline.</documentation>
          </annotation>
        </element>
      </sequence>
      <attribute name="interpolation" type="gml:CurveInterpolationType" fixed="cubicSpline">
        <annotation>
          <documentation>The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".</documentation>
        </annotation>
      </attribute>
      <attribute name="degree" type="integer" fixed="3">
        <annotation>
          <documentation>The degree for a cubic spline is "3".</documentation>
        </annotation>
      </attribute>
    </extension>
  </complexContent>
</complexType>
Schema location http://xml.fmi.fi/schema/woml/core/2010/05/28/woml-common-geometry.xsd
Attribute womlcore:CubicSplineRingType / @interpolation
Namespace No namespace
Annotations
The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".
Type gml:CurveInterpolationType
Properties
fixed: cubicSpline
Facets
enumeration linear
enumeration geodesic
enumeration circularArc3Points
enumeration circularArc2PointWithBulge
enumeration circularArcCenterPointWithRadius
enumeration elliptical
enumeration clothoid
enumeration conic
enumeration polynomialSpline
enumeration cubicSpline
enumeration rationalSpline
Used by
Source
<attribute name="interpolation" type="gml:CurveInterpolationType" fixed="cubicSpline">
  <annotation>
    <documentation>The attribute "interpolation" specifies the curve interpolation mechanism used for this segment. This mechanism uses the control points and control parameters to determine the position of this curve segment. For a CubicSpline the interpolation is fixed as "cubicSpline".</documentation>
  </annotation>
</attribute>
Schema location http://xml.fmi.fi/schema/woml/core/2010/05/28/woml-common-geometry.xsd
Attribute womlcore:CubicSplineRingType / @degree
Namespace No namespace
Annotations
The degree for a cubic spline is "3".
Type integer
Properties
fixed: 3
Used by
Source
<attribute name="degree" type="integer" fixed="3">
  <annotation>
    <documentation>The degree for a cubic spline is "3".</documentation>
  </annotation>
</attribute>
Schema location http://xml.fmi.fi/schema/woml/core/2010/05/28/woml-common-geometry.xsd