Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axislabels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional.When the srsName attribute is omitted, this attribute shall also be omitted.
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3.This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be usedanymore and may be deleted in future versions of GML without further notice.
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension isspecified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at thelocation the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context thisgeometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specifiedat the direct position level only in rare cases.
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in thegml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When theaxisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attributeshall also be omitted.
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axislabels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional.When the srsName attribute is omitted, this attribute shall also be omitted.
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3.This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be usedanymore and may be deleted in future versions of GML without further notice.
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension isspecified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at thelocation the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context thisgeometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specifiedat the direct position level only in rare cases.
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in thegml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When theaxisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attributeshall also be omitted.
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axislabels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional.When the srsName attribute is omitted, this attribute shall also be omitted.
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3.This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be usedanymore and may be deleted in future versions of GML without further notice.
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension isspecified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at thelocation the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context thisgeometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specifiedat the direct position level only in rare cases.
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in thegml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When theaxisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attributeshall also be omitted.
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axislabels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional.When the srsName attribute is omitted, this attribute shall also be omitted.
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3.This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be usedanymore and may be deleted in future versions of GML without further notice.
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension isspecified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at thelocation the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context thisgeometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specifiedat the direct position level only in rare cases.
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in thegml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When theaxisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attributeshall also be omitted.
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
The 'actuate' attribute is used to communicate the desired timingof traversal from the starting resource to the ending resource;it's value should be treated as follows:onLoad - traverse to the ending resource immediately on loadingthe starting resourceonRequest - traverse from the starting resource to the endingresource only on a post-loading event triggered forthis purposeother - behavior is unconstrained; examine other markup in linkfor hintsnone - behavior is unconstrained
The 'show' attribute is used to communicate the desired presentationof the ending resource on traversal from the starting resource; it'svalue should be treated as follows:new - load ending resource in a new window, frame, pane, or otherpresentation contextreplace - load the resource in the same window, frame, pane, orother presentation contextembed - load ending resource in place of the presentation of thestarting resourceother - behavior is unconstrained; examine other markup in thelink for hintsnone - behavior is unconstrained
A CompositeCurve is defined by a sequence of (orientable) curves such that the each curve in the sequence terminates at the start point of the subsequent curve in the list.
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axislabels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional.When the srsName attribute is omitted, this attribute shall also be omitted.
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3.This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be usedanymore and may be deleted in future versions of GML without further notice.
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension isspecified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at thelocation the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context thisgeometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specifiedat the direct position level only in rare cases.
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in thegml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When theaxisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attributeshall also be omitted.
Source
<complexType name="CompositeCurveType"><annotation><documentation>A CompositeCurve is defined by a sequence of (orientable) curves such that the each curve in the sequence terminates at the start point of the subsequent curve in the list.</documentation></annotation><complexContent><extension base="gml:AbstractCurveType"><sequence><element ref="gml:curveMember" maxOccurs="unbounded"><annotation><documentation>This element references or contains one curve in the composite curve. The curves are contiguous, the collection of curves is ordered. NOTE: This definition allows for a nested structure, i.e. a CompositeCurve may use, for example, another CompositeCurve as a curve member.</documentation></annotation></element></sequence></extension></complexContent></complexType>
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
The 'actuate' attribute is used to communicate the desired timingof traversal from the starting resource to the ending resource;it's value should be treated as follows:onLoad - traverse to the ending resource immediately on loadingthe starting resourceonRequest - traverse from the starting resource to the endingresource only on a post-loading event triggered forthis purposeother - behavior is unconstrained; examine other markup in linkfor hintsnone - behavior is unconstrained
The 'show' attribute is used to communicate the desired presentationof the ending resource on traversal from the starting resource; it'svalue should be treated as follows:new - load ending resource in a new window, frame, pane, or otherpresentation contextreplace - load the resource in the same window, frame, pane, orother presentation contextembed - load ending resource in place of the presentation of thestarting resourceother - behavior is unconstrained; examine other markup in thelink for hintsnone - behavior is unconstrained
A CompositeSurface is defined by a set of orientable surfaces. A composite surface is geometry type with all the geometric properties of a (primitive) surface. Essentially, a composite surface is a collection of surfaces that join in pairs on common boundary curves and which, when considered as a whole, form a single surface.
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axislabels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional.When the srsName attribute is omitted, this attribute shall also be omitted.
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3.This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be usedanymore and may be deleted in future versions of GML without further notice.
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension isspecified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at thelocation the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context thisgeometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specifiedat the direct position level only in rare cases.
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in thegml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When theaxisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attributeshall also be omitted.
Source
<complexType name="CompositeSurfaceType"><annotation><documentation>A CompositeSurface is defined by a set of orientable surfaces. A composite surface is geometry type with all the geometric properties of a (primitive) surface. Essentially, a composite surface is a collection of surfaces that join in pairs on common boundary curves and which, when considered as a whole, form a single surface.</documentation></annotation><complexContent><extension base="gml:AbstractSurfaceType"><sequence><element ref="gml:surfaceMember" maxOccurs="unbounded"><annotation><documentation>This element references or contains one surface in the composite surface. The surfaces are contiguous. NOTE: This definition allows for a nested structure, i.e. a CompositeSurface may use, for example, another CompositeSurface as a member.</documentation></annotation></element></sequence></extension></complexContent></complexType>
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
The 'actuate' attribute is used to communicate the desired timingof traversal from the starting resource to the ending resource;it's value should be treated as follows:onLoad - traverse to the ending resource immediately on loadingthe starting resourceonRequest - traverse from the starting resource to the endingresource only on a post-loading event triggered forthis purposeother - behavior is unconstrained; examine other markup in linkfor hintsnone - behavior is unconstrained
The 'show' attribute is used to communicate the desired presentationof the ending resource on traversal from the starting resource; it'svalue should be treated as follows:new - load ending resource in a new window, frame, pane, or otherpresentation contextreplace - load the resource in the same window, frame, pane, orother presentation contextembed - load ending resource in place of the presentation of thestarting resourceother - behavior is unconstrained; examine other markup in thelink for hintsnone - behavior is unconstrained
A composite solid is a geometry type with all the geometric properties of a (primitive) solid.Essentially, a composite solid is a collection of solids that join in pairs on common boundary surfaces and which, when considered as a whole, form a single solid.
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axislabels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional.When the srsName attribute is omitted, this attribute shall also be omitted.
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3.This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be usedanymore and may be deleted in future versions of GML without further notice.
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension isspecified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at thelocation the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context thisgeometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specifiedat the direct position level only in rare cases.
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in thegml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When theaxisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attributeshall also be omitted.
Source
<complexType name="CompositeSolidType"><annotation><documentation>A composite solid is a geometry type with all the geometric properties of a (primitive) solid. Essentially, a composite solid is a collection of solids that join in pairs on common boundary surfaces and which, when considered as a whole, form a single solid.</documentation></annotation><complexContent><extension base="gml:AbstractSolidType"><sequence><element ref="gml:solidMember" maxOccurs="unbounded"><annotation><appinfo><sch:pattern name="Check either href or content not both"><sch:rule context="gml:solidMember"><sch:extends rule="hrefOrContent"/></sch:rule></sch:pattern></appinfo><documentation>This element references or contains one solid in the composite solid. The solids are contiguous. NOTE: This definition allows for a nested structure, i.e. a CompositeSolid may use, for example, another CompositeSolid as a member.</documentation></annotation></element></sequence></extension></complexContent></complexType>
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
The 'actuate' attribute is used to communicate the desired timingof traversal from the starting resource to the ending resource;it's value should be treated as follows:onLoad - traverse to the ending resource immediately on loadingthe starting resourceonRequest - traverse from the starting resource to the endingresource only on a post-loading event triggered forthis purposeother - behavior is unconstrained; examine other markup in linkfor hintsnone - behavior is unconstrained
The 'show' attribute is used to communicate the desired presentationof the ending resource on traversal from the starting resource; it'svalue should be treated as follows:new - load ending resource in a new window, frame, pane, or otherpresentation contextreplace - load the resource in the same window, frame, pane, orother presentation contextembed - load ending resource in place of the presentation of thestarting resourceother - behavior is unconstrained; examine other markup in thelink for hintsnone - behavior is unconstrained
Ordered list of labels for all the axes of this CRS. The gml:axisAbbrev value should be used for these axislabels, after spaces and forbiddden characters are removed. When the srsName attribute is included, this attribute is optional.When the srsName attribute is omitted, this attribute shall also be omitted.
This attribute is included for backward compatibility with GML 2 and is deprecated with GML 3.This identifer is superceded by "gml:id" inherited from AbstractGMLType. The attribute "gid" should not be usedanymore and may be deleted in future versions of GML without further notice.
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
The "srsDimension" is the length of coordinate sequence (the number of entries in the list). This dimension isspecified by the coordinate reference system. When the srsName attribute is omitted, this attribute shall be omitted.
In general this reference points to a CRS instance of gml:CoordinateReferenceSystemType(see coordinateReferenceSystems.xsd). For well known references it is not required that the CRS description exists at thelocation the URI points to. If no srsName attribute is given, the CRS must be specified as part of the larger context thisgeometry element is part of, e.g. a geometric element like point, curve, etc. It is expected that this attribute will be specifiedat the direct position level only in rare cases.
Ordered list of unit of measure (uom) labels for all the axes of this CRS. The value of the string in thegml:catalogSymbol should be used for this uom labels, after spaces and forbiddden characters are removed. When theaxisLabels attribute is included, this attribute shall also be included. When the axisLabels attribute is omitted, this attributeshall also be omitted.
A property that has a geometric complex as its value domain can either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Either the reference or the contained element must be given, but neither both nor none.NOTE: The allowed geometry elements contained in such a property (or referenced by it) have to be modelled by an XML Schema choice element since the composites inherit both from geometric complex *and* geometric primitive and are already part of the _GeometricPrimitive substitution group.
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
The 'actuate' attribute is used to communicate the desired timingof traversal from the starting resource to the ending resource;it's value should be treated as follows:onLoad - traverse to the ending resource immediately on loadingthe starting resourceonRequest - traverse from the starting resource to the endingresource only on a post-loading event triggered forthis purposeother - behavior is unconstrained; examine other markup in linkfor hintsnone - behavior is unconstrained
The 'show' attribute is used to communicate the desired presentationof the ending resource on traversal from the starting resource; it'svalue should be treated as follows:new - load ending resource in a new window, frame, pane, or otherpresentation contextreplace - load the resource in the same window, frame, pane, orother presentation contextembed - load ending resource in place of the presentation of thestarting resourceother - behavior is unconstrained; examine other markup in thelink for hintsnone - behavior is unconstrained
<complexType name="GeometricComplexPropertyType"><annotation><documentation>A property that has a geometric complex as its value domain can either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Either the reference or the contained element must be given, but neither both nor none. NOTE: The allowed geometry elements contained in such a property (or referenced by it) have to be modelled by an XML Schema choice element since the composites inherit both from geometric complex *and* geometric primitive and are already part of the _GeometricPrimitive substitution group.</documentation></annotation><sequence minOccurs="0"><choice><element ref="gml:GeometricComplex"/><element ref="gml:CompositeCurve"/><element ref="gml:CompositeSurface"/><element ref="gml:CompositeSolid"/></choice></sequence><attributeGroup ref="gml:AssociationAttributeGroup"><annotation><documentation>This attribute group includes the XLink attributes (see xlinks.xsd). XLink is used in GML to reference remote resources (including those elsewhere in the same document). A simple link element can be constructed by including a specific set of XLink attributes. The XML Linking Language (XLink) is currently a Proposed Recommendation of the World Wide Web Consortium. XLink allows elements to be inserted into XML documents so as to create sophisticated links between resources; such links can be used to reference remote properties. A simple link element can be used to implement pointer functionality, and this functionality has been built into various GML 3 elements by including the gml:AssociationAttributeGroup.</documentation></annotation></attributeGroup></complexType>
